15 cm TbtsK C/36 naval gun

15 cm TbtsK C/36
Forward 15 cm TbtsK C/36 naval guns placed on a Drh L C/38 twin mount, on Z39 in 1945, in US service as DD-939.
Type	Naval gun
Place of origin	Nazi Germany
Service history
In service	1942–1945
Used by	Nazi Germany
Wars	Second World War
Production history
Designer	Rheinmetall
Designed	1936
Manufacturer	Rheinmetall
Specifications
Mass	7,200–8,564 kilograms (15,873–18,880 lb)
Length	7.165 meters (23.51 ft)
Barrel length	6.815 meters (22.36 ft) (bore)
Shell	separate-loading, cased charge
Shell weight	45.3 kilograms (100 lb)
Caliber	15 cm (5.9 in) (nominal) 14.91 centimeters (5.87 in) actual
Breech	horizontal sliding-block
Elevation	C/36 single mount: -10° to +30° C/38 Twin mount: -10° to +65°
Traverse	Varied based on type and location of mount.
Rate of fire	8 rpm (maximum)
Muzzle velocity	835 meters per second (2,740 ft/s)
Effective firing range	23.55 kilometres (14.63 mi) at 47°
Maximum firing range	21,950 meters (24,000 yd) at 30°

The 15 cm TbtsK C/36 was a German medium-caliber naval gun deployed on Type 1936A (Mob) destroyers during the Second World War. It was designed because the Oberkommando der Marine (German Naval High Command) thought that the 12.7 cm (5.0 in) guns of the Type 1936 and 1936A destroyers would potentially be inferior to those of possible enemies. The guns caused serious issues when placed upon the ships as they added significant weight high up on the ships. To deal with this increase in weight, the destroyers had one gun removed, sometimes with a twin gun being used in order to keep five guns.

In 1932, the Reichsmarine (Weimar Republican Navy) approved a new program for 1,500 tonnes (1,500 long tons; 1,700 short tons) destroyers. Design work for the project began immediately, at the Vulcan Shipyard in Stettin, and at the F Schichau yard in Elbing. These were to have main guns of a 12.7-centimetre (5.0 in) caliber, in order to match or exceed the firepower of other countries destroyers, which usually had a caliber of between 12 cm (4.7 in) and 13 cm (5.1 in). The 15 cm TbtsK C/36 was originally designed to be used on torpedo boats, but studies into its possible usage on destroyers, and of rearming the Type 1934 and 1934A destroyers with it began after the commissioning of the two classes, in 1936. The Oberkommando der Marine (Naval High Command) thought that the 12.7 cm (5.0 in) guns of the Type 1936 and 1936A destroyers may be inferior to that of some potential enemies, and thus ordered that the new Type 1936 destroyers should have 15 cm (5.9 in) guns.^[1]

In order to test the 15 cm guns, the German destroyer Z8 Bruno Heinemann had her 12.7 cm SK C/34 guns replaced by five 15 cm TbtsK C/36 guns, in single mountings, in 1938. It was quickly discovered that not only did the guns themselves cause problems, but also that the mountings were far too heavy.^[1] The new weight placed so high up on the ship seriously damaged stability, and in heavy seas only two of the five guns could be worked.^[2] In an attempt to remedy the problem, one of the 15 cm guns was removed, but this did not fix the problem. Z8 Bruno Heinemann quickly had her old 12.7 cm guns reinstalled.^[3]

The 15 cm TbtsK C/36 naval gun had an actual caliber of exactly 14.91 cm (5.87 in), a weight of 7,200 kilograms (15,900 lb), an overall length of 7.165 metres (23.51 ft), a bore length of 6.815 m (22.36 ft), a chamber volume of 212 cubic centimetres (12.9 cu in), a rifling length of 558.7 cm (220.0 in). It had 44 grooves, which were all 1.75 millimetres (0.069 in) by 6.14 mm (0.242 in) in size. It shot a projectile which weighed 45.3 kg (100 lb), which was propelled by 13.5 kg (30 lb) of RPC/38, with a muzzle velocity of 875 metres per second (2,870 ft/s). The gun had a working pressure of 3,000 kilograms per square centimetre (43,000 psi), and had a service life of about 1,600 rounds fired. The gun had a maximum range of 23.55 kilometres (14.63 mi) at 47° of elevation.^[4]

The 15 cm TbtsK C/36 naval gun was semi-automatic, and had a horizontal sliding breech, which needed to be manually opened to load the first shot. The first shot was loaded using a breech level, which was on the right hand side of the breech ring. The barrel was somewhat loose, but anchored to the breech end with a breech nut. The gun had an electromagnetic trigger circuit, which was backed up by a mechanical system in case of emergency. The gun was placed on a TbtsL C/36 mount. This mount was placed upon a cylindrical pillar, which was affixed to the base by fourteen bolts. The mount's vertical shaft bearing was in the centre of the pillar, and was topped by the toothed training ring. The mount itself was made out of a splinter-proof shield, training and elevation mechanisms, buffer-stops, the gunners' seats, gun sights, triggers, remote control mechanisms and the electric gun motors. In 1943, tests were done on adding a muzzle heater to the barrel of the 15 cm TbtsK C/36 gun, in order to prevent the barrel from icing up in freezing temperatures, but this was abandoned when it was found that it both would consume too much electricity, and put too much strain on the mount's elevating gear.^[3] The gun cradle was made of a hollow tube, two hydraulic buffers which could absorb a recoil force of up to 58,000 kg (128,000 lb), and a pneumatic recuperator.^[5]

The 15 cm TbtsK C/36 naval gun's training and elevation mechanisms were powered either manually or by electric motors, which were controlled by hydraulic handles. The left side gunner controlled the training and elevating mechanisms. When power training was on, the movement of the gun could be controlled simply by the hand-wheels, in an arc of up to 150°. In order to revert to manual controls, all the handles had to be disengaged. In an emergency, the right side gunner could take control of the training and elevation of the gun. The gun had two trigger systems, one electromagnetic, the other mechanical. Both gunners had a foot pedal for the mechanical system, which could also be fired directly by attaching a lanyard to the trigger level, if needed. Both gunners had a trigger switch on their right hand-wheel, which controlled the electromagnetic circuit, which could also be fired remotely from the conning tower, if needed. Both gunners had linked stereoscopic sights, which could magnify between 5x and 10x zoom. The right gunner was responsible for making corrections for elevation, which were supplied by two sets of compensating gears. The first gear, also called the "Regler" gear, gave corrections based upon what type of ammunition was in use, and the second compensated for barrel wear.^[4] Firing information was transmitted to the gun via wire, from the fire-direction centre. Both gunners had a receiver, and their settings would be transmitted to the fire-direction centre, which also had an intercom link to the guns.^[6]

The C/36 gun house had a total weight of 18,800 kg (41,400 lb): 7,200 kg (15,900 lb) from the barrel and breech, 1,730 kg (3,810 lb) from the cradle and recuperating gear (only 1,500 kg (3,300 lb) after 1942 modifications), 3,885 kg (8,565 lb) from the mount, 4,153 kg (9,156 lb) from the gun shield, 650 kg (1,430 lb) from the gun sights, and 580 kg (1,280 lb) from the electronic wires and equipment. The gun house could have up to an extra 330 kg (730 lb) in auxiliary equipment. Of the five single turrets, the first, 'A', could be trained from 30° to 0° to 330°. The second, 'B', could be trained from 40° to 0° to 320°. The third, 'C', could be trained from 20° to 0° to 340°. The fourth, 'D', could be trained from 27° to 0° to 333°. The fifth, 'E', could be trained from 42° to 0° to 318°. All of the turrets could be depressed to up to –10°, or elevated to up to 30°.^[7]

The C/36 gun house was encased by a splinter-proof shield, which covered the front, sides, and top of the gun, but not the rear.^[7] The gun house's armor was 10 mm (0.39 in) thick in the front, and 6 mm (0.24 in) thick on the sides and roof.^[8] The front side contained two closable flaps for sighting ports, one to the right and one to the left of the central gun port. The foot of the shield contained four inspection flaps, two at the front, and one on both the right and left side. These flaps allowed for the power-training equipment to be serviced easily. The mount was supplied from the ship's main supply.^[7] This current powered the trigger circuit solenoid, the 1 kilowatt (1.3 hp) permanent and 3 kW (4.0 hp) peak output training and elevating motors, and the moveable auxiliary lighting of the mount.^[9]

The DrhL C/38 turret was originally designed for the three O class battlecruisers and cruisers, but after these were cancelled, it was decided to use them to arm the Type 1936A destroyers. It was thought that one twin turret might raise the number of effective guns back to five, without causing the same weight problems that led to the reduction down to four. Two 15 cm TbtsK C/36 guns were thus fit into the DrhL C/38 twin turret. Despite extensive melding and other modifications, the new twin turret still weighed almost twice that of the C/36 turret, making it roughly weight equal with simply adding back the fifth C/36 gun. Additionally, there were problems integrating the new DrhL C/38 turret into the existing fire control systems. There were some plans to mount two of these turrets onto new destroyers, but they were never put into place.^[10] The DrhL C/38 turret was used on the German destroyers: Z23, Z24, Z25, Z29, Z31, Z32, Z33, Z34, Z37, Z38, Z39, Z40, Z41, and Z42.^[11]

The C/38 turret was elevated by a Pittler-Thoma hydraulic gear, which was powered by electric motors, and training was done by electric motors. Manual training could also be used in emergencies. The internal design of the C/38 turret was almost identical to that of the C/36, and their guns and equipment were entirely identical. Both guns had an Ardelt electric ammunition hoist, and a ten-round ready use supply was placed at the rear of the turret, allowing the gunners to fire at short notice, without having to wait for the hoists.^[12] These ready use charges were kept in airtight aluminum containers, which were themselves locked in galvanized steel boxes, in order to keep them dry.^[13]

The C/38 had a total weight of 60.4 t (59.4 long tons; 66.6 short tons): 7,200 kg from the barrel and breech, 4,300 kg (9,500 lb) from the cradle and recuperator, 22,250 kg (49,050 lb) from the mount, 13,750 kg (30,310 lb) from the turret shield, 650 kg (1,430 lb) from the sights, and 2,400 kg (5,300 lb) from the electronic wiring and mechanisms. The turret had an armor thickness of 30 mm (1.2 in) on the front, 20 mm (0.79 in) on the sides, 20 mm on the roof, and 15 mm (0.59 in) on the rear. The turret had a barbette diameter of 3.2 m (10 ft), a turret diameter of 2.8 m (9 ft 2 in), and a recoil distance of 44 cm (17 in). The distance between the twin guns was 1.07 m (3 ft 6 in). The gun could be elevated at up to 8°/s, and trained at the same speed. The turret had a maximum depression of –10°, and a maximum elevation of 65°. Of the turrets: 'A', which was the sole Drhl C/38 twin turret, could be trained from 30° to 0° to 330°. 'B' could be trained from 42° to 0° to 318°. 'C' could be trained from 27° to 0° to 333°. 'D' could be trained from 20° to 0° to 340°.^[12]

The C/36 gun was installed in a number of static gun batteries for coastal defence. In Normandy, the Longues-sur-Mer battery had four steel-reinforced concrete casemates each with a C/36 naval gun. The guns were controlled by a ranging post in front of the battery.

• Skwiot, Miroslaw (2011). German Naval Guns: 1939-1945. Barnsley: Seaforth. ISBN 978-1591143116.
• Koop, Gerhard & Schmolke, Klaus-Peter (2003). German Destroyers of World War II. Annapolis: Naval Institute Press. ISBN 978-1-59114-307-9.

Wikimedia Commons has media related to 15 cm TbtsK C/36 naval gun.

• TbtsK C/36 on Navweaps.com