The aircraft's design was attributed to "the result of many years of affection for WWI type aircraft and a "too limited" flying budget."[5]
Design and development
The Nieuport 11 was the first design in the family and is a 7/8 (87%) scale version of the original French Nieuport 11Bebefighter. The prototype, registered as a Canadian basic ultralight as C-IRCA, first flew in July 1984.[3][4][6]
The Nieuport 11 is constructed from 6061-T6 aluminum tubing, supported with 2024-T3 aluminum gussets, held together with blind rivets. At one point welded steel tube fuselages were also available. The wings, tail and fuselage are then covered with doped aircraft fabric. Landing gear is conventional, with 24 in (61 cm) spoked mainwheels with bungee suspension. The original design calls for a tailskid, the same as the World War One original aircraft, but since the skid is impractical on hard surfaced runways, a tailwheel is optional. The engine cowling is a horseshoe shaped semi-circular design.[1][4][6]
The Nieuport 11 won Grand Champion Light Plane at Oshkosh in 1989 and the Nieuport 12 won Reserve Grand Champion at Oshkosh in 1990.[5]
Variants
Nieuport 11
Single seat 7/8 scale reproduction of the Nieuport 11 fighter of 1916. First flown in July 1984. Kits were available in ultralight and experimental versions to meet United States FAR 103 Ultralight Vehicles and Experimental amateur-built regulations respectively. The ultralight version uses lighter tubing, engine and wheels to save weight.[2][3][4][5]
Nieuport 12
Two seat 7/8 scale reproduction of the Nieuport 12 WWI observation aircraft, first flown in 1989. The designer estimates construction time at 1400 hours. Aircraft has 1,000 lb (454 kg) gross weight. Recommended engines include the 64 hp (48 kW) Rotax 582, 65 hp (48 kW) Continental A65, 65 hp (48 kW) Lycoming O-145 or 60 hp (45 kW) Volkswagen air-cooled engine.[1][3][5]
Nieuport 17
Single seat 7/8 scale reproduction of the Nieuport 17 WWI fighter aircraft. This variant is similar to the Nieuport 11, but with a 2 ft (61 cm) greater wingspan and a completely circular engine cowling. The designer estimates construction time at 400 hours.[5]