|
GM small gasoline engine
The GM Small Gasoline Engine (SGE) is a family of small-displacement, inline three- and four-cylinder gasoline engines ranging from 1.0 L to 1.5 L, developed by Adam Opel AG, Shanghai Automotive Industry Corporation (SAIC), MG Motor (MG), Shanghai GM (SGM), and the Pan-Asia Technical Automotive Center (PATAC).[1] The new global family is designed to improve fuel economy, performance, and emissions, while reducing noise and vibrations. To achieve this, it features a lightweight design and advanced technologies like gasoline direct injection, turbocharging, variable-length intake manifolds, and alternative fuel compatibility. It uses a modular approach with interchangeable components that can be suited to specific applications. The SGE is available in the following displacements:
All engines share a common block design (depending on the number of cylinders) and a 74 mm (2.91 in) bore with 81 mm (3.19 in) bore spacing. The one-stage single-scroll turbocharger in turbocharged variants is supplied by Mitsubishi Heavy Industries.[2] To reduce noise, vibration, and harshness (NVH) levels, the direct injection fuel rail mounts to the cylinder head and valve cover via bushings that isolate the loud ticking noise that injector pintles make. GM claims that the 1.0-liter turbo is 25 percent (3 dBA) quieter than the Ford Fiesta's 1.0-liter turbo, and the 1.4-liter is up to 50 percent (6 dBA) quieter than the VW/Audi 1.4-liter turbo. Other silencing measures include a bed-plate cylinder block that increases stiffness and a stiffened aluminum front cam cover. Three-cylinder variants get a balance shaft that is integrated with the oil pump and located inside the two-piece aluminum oil pan to prevent radiated noise. The shaft counter-rotates at engine speed. GM claims that the EcoTec three-cylinder idles more smoothly than Ford's three-cylinder, which does not use a shaft.[2] All turbocharged variants provide 90 percent of their maximum torque between 1500 and 5000 rpm, with peak power arriving between 5600 and 6000 rpm. The MHI turbochargers are sized to provide quick torque response, and are mounted very close to the cylinders, thanks to cylinder heads that incorporate the exhaust manifolds in the head.[2] To reduce mass, the engines are compact in all directions, made almost entirely of aluminum, and feature composite intake manifolds. This removes 44 pounds (20 kg) from the existing 1.4-liter turbo in the Cruze and makes it 8 pounds (4 kg) lighter than the 1.4-liter VW turbo. GM says this engine weighs 216 pounds (98 kg), ready for installation.[2] The engines debuted in the 2014 Opel Adam[3] and are produced in Szentgotthárd, Hungary,[4] and GM's Flint Engine plant.[5] By 2018, the new engine family had spread to other brands and markets and had replaced three separate engine families (S-TEC, Family 0, and Family 1). The assembly lines for North American facilities were manufactured by Hirata Corporation at its powertrain facility in Kumamoto, Japan. Non-Opel Variants1.4LV7The LV7 is the multi-point fuel injection 1.4 L naturally-aspirated variant of the SGE, with a 74 mm × 81.3 mm (2.91 in × 3.20 in) bore and stroke for a total capacity of 1,399 cc (1.4 L). Compression ratio is 10.6:1 and the engine can run on regular unleaded grade gasoline. Assembly is in Changwon, South Korea.
LE2 The LE2 is the direct-injection 1.4 L turbocharged variant of the SGE, with a 74 mm × 81.3 mm (2.91 in × 3.20 in) bore and stroke for a total capacity of 1,399 cc (1.4 L). Compression ratio is 10.0:1 and the engine can run on regular grade gasoline. The LE2 is also paired with a start-stop system in some vehicles.
1.5L3AThe L3A is the direct-injection 1.5 L naturally-aspirated variant of the SGE used in the second-generation Chevrolet Volt, with a 74 mm × 86.6 mm (2.91 in × 3.41 in) bore and stroke for a total capacity of 1,490 cc (1.5 L). The compression ratio is 12.5:1 and the engine can run on regular unleaded-grade gasoline. Maximum engine speed is 6000 rpm.
LFVThe LFV is a direct-injection 1.5 L turbocharged SGE variant, with a 74 mm × 86.6 mm (2.91 in × 3.41 in) bore and stroke for a total capacity of 1,490 cc (1.5 L). Compression ratio is 10.0:1 and the engine can run on regular unleaded-grade gasoline. Maximum engine speed is 6500 rpm. Automatic Start-Stop is available with this engine. Assembly is in Shanghai (China), Changwon (South Korea), Toluca (Mexico), Spring Hill (Tennessee), and Flint (Michigan).
LYXThe LYX is a direct-injection 1.5 L turbocharged SGE variant, with a 74 mm × 86.6 mm (2.91 in × 3.41 in) bore and stroke for a total capacity of 1,490 cc (1.5 L). Compression ratio is 10.0:1 and uses regular unleaded gasoline.
LSDThe LSD is a direct-injection 1.5 L turbocharged SGE variant, with a 74 mm × 86.6 mm (2.91 in × 3.41 in) bore and stroke for a total capacity of 1,490 cc (1.5 L). Compression ratio is 10.0:1 and uses regular unleaded gasoline. Horsepower has increased to 175 hp (vs LYX-170hp) while torque remains 203 lb-ft of torque. Hardware enhancements including a higher-pressure fuel system (35MPa from 20MPa), enhanced piston design with PVD coating, and precise intake phaser positioning helps optimize efficiency and contribute to overall performance.[6]
Opel Variants
See also
References
External links Wikimedia Commons has media related to General Motors Small Gasoline engine. |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
