Panauti Hydropower Station

This article needs additional citations for verification. Please help improve this article by adding citations to reliable sources. Unsourced material may be challenged and removed. Find sources: "Panauti Hydropower Station" – news · newspapers · books · scholar · JSTOR (January 2021) (Learn how and when to remove this message)

Panauti Hydropower Station
Location of Panauti Hydropower Station in Nepal
Official name	Panauti Hydropower Station
Country	Nepal
Location	Kavre District
Coordinates	27°33′47″N 85°32′10″E / 27.56308°N 85.53604°E / 27.56308; 85.53604
Purpose	Power
Status	Operational
Owner(s)	Nepal Electricity Authority
Type	Run-of-the-river
Installed capacity	2.4 MW

Panauti Hydropower Station (also called Khopasi Hydropower Station) is the third hydropower station which was constructed in Nepal, in 1965.^[1] It is the first megawatt (MW) capacity hydropower station in Nepal.^{[clarification needed]}

It is a run-of-the-river hydroelectric plant on the Roshi Khola river. This power station is located at Khopasi, Kavre district, 35 km east of Kathmandu and 7 km south-east from Panauti Bazar.

It was built in 1965 with the assistance from then Soviet Union at a cost of NRs 27 million. It has a capacity of 2.4 MW, from 3 units of 0.8 MW each and annual design generation of 6.97 GWh. The Project was designed for operation of only two units at a time with third unit as a standby. Open canal of 3,721 m long with discharge of 3.2 cu. m/s from headwork to reservoir has seven (7) outlet gates for irrigation in the vicinity of Khopasi.

After the major improvement activities accomplished in 2018/019 ( Rehabilitation and Modernization of Switchyards of Panauti Hydropower Station located at Khopasi and Bhakatpur ), Panauti Hydropower Station is generating maximum annual energy (in 2018/19) which the power plant had not been able to do since the last 11 years.^[2]

^[3]