Before the Prophet-5, synthesizers required users to adjust controls to change sounds, with no guarantee of exactly recreating a sound. Sequential used microprocessors to allow users to recall sounds instantly rather than having to recreate them manually. The Prophet-5 facilitated a move from synthesizers creating unpredictable sounds to producing "a standard package of familiar sounds".[3]: 385
The Prophet-5 became a market leader and was widely used in popular music and film soundtracks. Between 1978 and 1984, about 6,000 units were produced across three revisions. In 1981, Sequential released a 10-voice, double-keyboard version, the Prophet-10. Sequential introduced new versions in 2020, and it has been emulated in software synthesizers and hardware. Sequential also released several further Prophet synthesizers, such as the Prophet '08.
From the 1987 jazz album Ecotopia by the band Oregon, this song starts with the Prophet-10 played solo by Ralph Towner. He is joined at ten seconds by Paul McCandless on soprano saxophone, with synth and horn each repeating the theme. Bass and percussion come in at 20 seconds.
The Prophet-5 was created in 1977 by the American engineers Dave Smith and John Bowen at Sequential Circuits.[1] At the time, Smith had a full-time job working with microprocessors, a new technology. Smith conceived the idea of combining them with synthesizer chips to create a programmable synthesizer; this would allow users to save sounds to memory, rather than having to recreate them manually.[4] He did not pursue the idea, assuming Moog or ARP would design the instrument first.[4] When no instrument emerged, in early 1977, Smith quit his job to work full-time on the idea.[4]
Initially, Smith and Bowen developed the Prophet-10, a synthesizer with ten voices of polyphony. However, it was unstable and quickly overheated, creating tuning problems. Smith and Bowen removed half the electronics, reducing the voices to five and creating the Prophet-5.[1] Smith demonstrated the Prophet-5 at the NAMM Convention in January 1978 and shipped the first models later that year.[5]
Production
Three versions were built between 1978 and 1984. The first, Revision 1, was hand-assembled and produced quickly to generate initial revenue; only 182 were made. Revision 2 was mass-produced in quantities over 1,000; this model was more robust, added cassette patch storage, and replaced the koa wood casing with walnut.[1] Revision 3 replaced the Solid State Music (SSM) chipset with Curtis (CEM) chips, necessitating a major redesign. According to Sound on Sound, Revision 3 "remained impressive and pleasant to play, but was slightly cold and featureless by comparison to earlier models".[1] In all, approximately 6,000 Prophet-5 synthesizers were produced.[1]
In the Prophet-10, a pair of Prophet-5 sound boards provide ten voices
In 1981, Sequential Circuits released the Prophet-10, featuring 10 voices, 20 oscillators, and a double manual keyboard. Like the Prophet-5 Revision 3, it uses CEM chips.[1] The first Prophet-10s used an Exatron Stringy Floppy drive for saving patches and storing sequencer data. Sequential later moved to a Braemar tape drive, which was more reliable and could store about four times as many sequencer events.[1]
In 2020, Sequential released a new version, the Prophet-5 Rev4, with additional memory and features. They also released a new version of the Prophet-10, with the same external design as the Prophet-5.[2][6][7]
Features
Unlike its nearest competitor in the 1970s, the Yamaha CS-80, the Prophet-5 has patch memory, allowing users to store sounds rather than having to reprogram them manually.[8] It has a proprietary serial interface that allows the user to play using the Prophet Remote, a sling-style keytar controller; the interface cannot connect the Prophet-5 to other devices. Sequential produced a MIDI interface that could be retrofitted to later Prophet-5 models. Third-party MIDI interfaces have also been offered.[1]
Impact
Before the Prophet-5, synthesizers required users to adjust cables and knobs to change sounds, with no guarantee of exactly recreating a sound.[3] The Prophet-5, with its ability to save sounds to patch memory, facilitated a move from synthesizers creating unpredictable sounds to producing "a standard package of familiar sounds".[3]: 385 The Prophet-5 became a market leader and industry standard.[9] According to MusicRadar, the Prophet-5 "changed the world – simple as that".[10]
Smith released several synthesizers with the Prophet name, including the Pro-One,[27] the Prophet VS,[28] the Prophet '08[29] and the Prophet-6.[30] They also released samplers, such as the Prophet 2000 and the Prophet 3000.[31][32] In 2020, Sequential announced a new version of the Prophet-5, the Rev 4. It adds features including USB and MIDI connectivity, velocity and aftertouch sensitivity, polyphonic glide, and two sets of filters.[6] Sequential also announced a new Prophet-10, initially released as a ten-voice single manual monotimbral version of the Rev 4.[7]
Bowen provided consultation for Native Instruments during the development of the Pro 5 software synthesizer emulation, released in 1999. It was followed by the Pro 52 in 2000 and the Pro 53 in 2003.[33][34][35] Bowen also provided consultation for Creamware for their 2003 software emulations, the Prophet and Prophet Plus.[35]Arturia, U-he and Softube released emulations in 2006, 2018 and 2023.[28][36][37] Hardware clones include the upcoming Behringer Pro-16, and PikoPiko Factory's open-source Profree-4, released in 2022.[38][39]