Share to:

 

Sunrise equation

A contour plot of the hours of daylight as a function of latitude and day of the year, using the most accurate models described in this article. It can be seen that the area of constant day and constant night reach up to the polar circles (here labeled "Anta. c." and "Arct. c."), which is a consequence of the earth's inclination.
A plot of hours of daylight as a function of the date for changing latitudes. This plot was created using the simple sunrise equation, approximating the sun as a single point and does not take into account effects caused by the atmosphere or the diameter of the Sun.

The sunrise equation or sunset equation can be used to derive the time of sunrise or sunset for any solar declination and latitude in terms of local solar time when sunrise and sunset actually occur.

Formulation

It is formulated as:

where:

is the solar hour angle at either sunrise (when negative value is taken) or sunset (when positive value is taken);
is the latitude of the observer on the Earth;
is the sun declination.

Principles

The Earth rotates at an angular velocity of 15°/hour. Therefore, the expression , where is in degree, gives the interval of time in hours from sunrise to local solar noon or from local solar noon to sunset.

The sign convention is typically that the observer latitude is 0 at the equator, positive for the Northern Hemisphere and negative for the Southern Hemisphere, and the solar declination is 0 at the vernal and autumnal equinoxes when the sun is exactly above the equator, positive during the Northern Hemisphere summer and negative during the Northern Hemisphere winter.

The expression above is always applicable for latitudes between the Arctic Circle and Antarctic Circle. North of the Arctic Circle or south of the Antarctic Circle, there is at least one day of the year with no sunrise or sunset. Formally, there is a sunrise or sunset when during the Northern Hemisphere summer, and when during the Northern Hemisphere winter. For locations outside these latitudes, it is either 24-hour daytime or 24-hour nighttime.

Expressions for the solar hour angle

In the equation given at the beginning, the cosine function on the left side gives results in the range [-1, 1], but the value of the expression on the right side is in the range . An applicable expression for in the format of Fortran 90 is as follows:

omegao = acos(max(min(-tan(delta*rpd)*tan(phi*rpd), 1.0), -1.0))*dpr

where omegao is in degree, delta is in degree, phi is in degree, rpd is equal to , and dpr is equal to .

The above expression gives results in degree in the range . When , it means it is polar night, or 0-hour daylight; when , it means it is polar day, or 24-hour daylight.

Hemispheric relation

Suppose is a given latitude in Northern Hemisphere, and is the corresponding sunrise hour angle that has a negative value, and similarly, is the same latitude but in Southern Hemisphere, which means , and is the corresponding sunrise hour angle, then it is apparent that

,

which means

.

The above relation implies that on the same day, the lengths of daytime from sunrise to sunset at and sum to 24 hours if , and this also applies to regions where polar days and polar nights occur. This further suggests that the global average of length of daytime on any given day is 12 hours without considering the effect of atmospheric refraction.

Generalized equation

Sextant sight reduction procedure showing solar altitude corrections for refraction and elevation.

The equation above neglects the influence of atmospheric refraction (which lifts the solar disc — i.e. makes the solar disc appear higher in the sky — by approximately 0.6° when it is on the horizon) and the non-zero angle subtended by the solar disc — i.e. the apparent diameter of the sun — (about 0.5°). The times of the rising and the setting of the upper solar limb as given in astronomical almanacs correct for this by using the more general equation

with the altitude angle (a) of the center of the solar disc set to about −0.83° (or −50 arcminutes).

The above general equation can be also used for any other solar altitude. The NOAA provides additional approximate expressions for refraction corrections at these other altitudes.[1] There are also alternative formulations, such as a non-piecewise expression by G.G. Bennett used in the U.S. Naval Observatory's "Vector Astronomy Software".[2]

Complete calculation on Earth

The generalized equation relies on a number of other variables which need to be calculated before it can itself be calculated. These equations have the solar-earth constants substituted with angular constants expressed in degrees.

Calculate current Julian day

where:

is the number of days since Jan 1st, 2000 12:00.
is the Julian date;
2451545.0 is the equivalent Julian year of Julian days for Jan-01-2000, 12:00:00.
0.0008 is the fractional Julian Day for leap seconds and terrestrial time (TT).
TT was set to 32.184 sec lagging TAI on 1 January 1958. By 1972, when the leap second was introduced, 10 sec were added. By 1 January 2017, 27 more seconds were added coming to a total of 69.184 sec. 0.0008=69.184 / 86400 without DUT1.
The operation rounds up to the next integer day number n.

Mean solar time

where:

is an approximation of mean solar time at integer expressed as a Julian day with the day fraction.
is the longitude (west is negative, east is positive) of the observer on the Earth;

Solar mean anomaly

where:

M is the solar mean anomaly used in the next three equations.

Equation of the center

where:

C is the Equation of the center value needed to calculate lambda (see next equation).
1.9148 is the coefficient of the Equation of the Center for the planet the observer is on (in this case, Earth)

Ecliptic longitude

where:

λ is the ecliptic longitude.
102.9372 is a value for the argument of perihelion.

Solar transit

where:

Jtransit is the Julian date for the local true solar transit (or solar noon).
2451545.0 is noon of the equivalent Julian year reference.
is a simplified version of the equation of time. The coefficients are fractional days.

Declination of the Sun

where:

is the declination of the sun.
23.4397° is Earth's maximum axial tilt toward the sun [3]

Alternatively, the Sun's declination could be approximated [4] as:

where:

d is the number of days after the spring equinox (usually March 21st).

Hour angle

This is the equation from above with corrections for atmospherical refraction and solar disc diameter.

where:

ωo is the hour angle from the observer's meridian;
is the north latitude of the observer (north is positive, south is negative) on the Earth.

For observations on a sea horizon needing an elevation-of-observer correction, add , or to the −0.833° in the numerator's sine term. This corrects for both apparent dip and terrestrial refraction. For example, for an observer at 10,000 feet, add (−115°/60) or about −1.92° to −0.833°.[5]

Calculate sunrise and sunset

where:

Jrise is the actual Julian date of sunrise;
Jset is the actual Julian date of sunset.

Example of implementation in Python

#!/usr/bin/env python3

import logging
from datetime import datetime, timedelta, timezone, tzinfo
from math import acos, asin, ceil, cos, degrees, fmod, radians, sin, sqrt
from time import time

log = logging.getLogger()


def _ts2human(ts: int | float, debugtz: tzinfo | None) -> str:
    return str(datetime.fromtimestamp(ts, debugtz))


def j2ts(j: float | int) -> float:
    return (j - 2440587.5) * 86400


def ts2j(ts: float | int) -> float:
    return ts / 86400.0 + 2440587.5


def _j2human(j: float | int, debugtz: tzinfo | None) -> str:
    ts = j2ts(j)
    return f'{ts} = {_ts2human(ts, debugtz)}'


def _deg2human(deg: float | int) -> str:
    x = int(deg * 3600.0)
    num = f'∠{deg:.3f}°'
    rad = f'∠{radians(deg):.3f}rad'
    human = f'∠{x // 3600}°{x // 60 % 60}{x % 60}″'
    return f'{rad} = {human} = {num}'


def calc(
        current_timestamp: float,
        f: float,
        l_w: float,
        elevation: float = 0.0,
        *,
        debugtz: tzinfo | None = None,
) -> tuple[float, float, None] | tuple[None, None, bool]:
    log.debug(f'Latitude               f       = {_deg2human(f)}')
    log.debug(f'Longitude              l_w     = {_deg2human(l_w)}')
    log.debug(f'Now                    ts      = {_ts2human(current_timestamp, debugtz)}')

    J_date = ts2j(current_timestamp)
    log.debug(f'Julian date            j_date  = {J_date:.3f} days')

    # Julian day
    # TODO: ceil ?
    n = ceil(J_date - (2451545.0 + 0.0009) + 69.184 / 86400.0)
    log.debug(f'Julian day             n       = {n:.3f} days')

    # Mean solar time
    J_ = n + 0.0009 - l_w / 360.0
    log.debug(f'Mean solar time        J_      = {J_:.9f} days')

    # Solar mean anomaly
    # M_degrees = 357.5291 + 0.98560028 * J_  # Same, but looks ugly
    M_degrees = fmod(357.5291 + 0.98560028 * J_, 360)
    M_radians = radians(M_degrees)
    log.debug(f'Solar mean anomaly     M       = {_deg2human(M_degrees)}')

    # Equation of the center
    C_degrees = 1.9148 * sin(M_radians) + 0.02 * sin(2 * M_radians) + 0.0003 * sin(3 * M_radians)
    # The difference for final program result is few milliseconds
    # https://www.astrouw.edu.pl/~jskowron/pracownia/praca/sunspot_answerbook_expl/expl-4.html
    # e = 0.01671
    # C_degrees = \
    #     degrees(2 * e - (1 / 4) * e ** 3 + (5 / 96) * e ** 5) * sin(M_radians) \
    #     + degrees(5 / 4 * e ** 2 - (11 / 24) * e ** 4 + (17 / 192) * e ** 6) * sin(2 * M_radians) \
    #     + degrees(13 / 12 * e ** 3 - (43 / 64) * e ** 5) * sin(3 * M_radians) \
    #     + degrees((103 / 96) * e ** 4 - (451 / 480) * e ** 6) * sin(4 * M_radians) \
    #     + degrees((1097 / 960) * e ** 5) * sin(5 * M_radians) \
    #     + degrees((1223 / 960) * e ** 6) * sin(6 * M_radians)

    log.debug(f'Equation of the center C       = {_deg2human(C_degrees)}')

    # Ecliptic longitude
    # L_degrees = M_degrees + C_degrees + 180.0 + 102.9372  # Same, but looks ugly
    L_degrees = fmod(M_degrees + C_degrees + 180.0 + 102.9372, 360)
    log.debug(f'Ecliptic longitude     L       = {_deg2human(L_degrees)}')

    Lambda_radians = radians(L_degrees)

    # Solar transit (julian date)
    J_transit = 2451545.0 + J_ + 0.0053 * sin(M_radians) - 0.0069 * sin(2 * Lambda_radians)
    log.debug(f'Solar transit time     J_trans = {_j2human(J_transit, debugtz)}')

    # Declination of the Sun
    sin_d = sin(Lambda_radians) * sin(radians(23.4397))
    # cos_d = sqrt(1-sin_d**2) # exactly the same precision, but 1.5 times slower
    cos_d = cos(asin(sin_d))

    # Hour angle
    some_cos = (sin(radians(-0.833 - 2.076 * sqrt(elevation) / 60.0)) - sin(radians(f)) * sin_d) / (cos(radians(f)) * cos_d)
    try:
        w0_radians = acos(some_cos)
    except ValueError:
        return None, None, some_cos > 0.0
    w0_degrees = degrees(w0_radians)  # 0...180

    log.debug(f'Hour angle             w0      = {_deg2human(w0_degrees)}')

    j_rise = J_transit - w0_degrees / 360
    j_set = J_transit + w0_degrees / 360

    log.debug(f'Sunrise                j_rise  = {_j2human(j_rise, debugtz)}')
    log.debug(f'Sunset                 j_set   = {_j2human(j_set, debugtz)}')
    log.debug(f'Day length                       {w0_degrees / (180 / 24):.3f} hours')

    return j2ts(j_rise), j2ts(j_set), None


def main():
    logging.basicConfig(level=logging.DEBUG)
    latitude = 33.00801
    longitude = 35.08794
    elevation = 0
    print(calc(time(), latitude, longitude, elevation, debugtz=timezone(timedelta(hours=3), 'fake-zone')))


if __name__ == '__main__':
    main()

See also

References

  1. ^ NOAA (U.S. Department of Commerce). "Solar Calculation Details". ESRL Global Monitoring Laboratory - Global Radiation and Aerosols.
  2. ^ "Correction Tables for Sextant Altitude". www.siranah.de.
  3. ^ "Earth Fact Sheet".
  4. ^ Sayigh, A. A. M. (1979). Basics of Solar Energy. Pergamon Press. ISBN 978-0-08-024744-1.
  5. ^ The exact source of these numbers are hard to track down, but Notes on the Dip of the Horizon provides a description yielding one less significant figure, with another page in the series providing -2.075.
Kembali kehalaman sebelumnya